Alright, let’s talk about how I made a DIY fleshlight using a condom. It’s not as complicated as you might think, and it’s a hell of a lot cheaper than buying a real one. Plus, you get the satisfaction of knowing you made it yourself.
Getting Started
First things first, I gathered my materials. Obviously, the main thing you need is a condom. Any kind will do, but I went with a standard, non-lubricated one. You can use a lubricated one, but you have to make sure to get all the lube out. Then, I grabbed a soft sponge and cut it in half. I also got a toilet paper roll, some tape, and a pair of scissors. That’s it. Simple, right?
Putting It Together
Next, I took one of the sponge halves and put the condom on it, just like how you would put a condom on a real one. I made sure to pinch the tip of the condom and roll it down as far as it could go. Then, I took the other sponge half and wrapped it around the first one, making sure the condom was sandwiched in between. This is what’s gonna give you that nice, snug feeling.
After that, I stuffed the whole thing into the toilet paper roll. This is where the tape comes in. I wrapped some tape around the roll and the sponges to keep everything in place. You don’t want this thing falling apart when you’re using it, trust me. I made sure to leave some of the sponge sticking out at both ends, though. This makes it easier to get a good grip and also prevents the condom from getting pushed too far inside.
Final Touches
Now, if you want to get fancy, you can add some extra details. I took a toothbrush – make sure you use the handle, not the bristles – and wrapped it around the outside of the toilet paper roll. I taped it in place, too. This adds some extra texture and can make things more interesting. Another thing you can do is add a layer of latex gloves. Take the condom out from the sponge, add three gloves inside, then put the condom on the sponge again. I put them in between the sponges for more sensations. Or, you can do whatever you want, really. This is your DIY fleshlight, after all.
Using It
Using this thing is pretty straightforward. Just add some lube to the inside of the condom, and you’re good to go. I’ve tried a few different lubes, and I found that water-based ones work best. They’re easy to clean up and don’t damage the condom. Silicone lubes can work, too, but they can be a bit messy. And whatever you do, don’t use oil-based lubes. They’ll break down the latex and ruin the whole thing.
And there you have it. That’s how I made a DIY fleshlight using a condom. It’s not perfect, but it gets the job done. And like I said, it’s way cheaper than buying a real one. So if you’re looking for a fun little project, give it a try. You might be surprised at how well it works.
